PP melt blown cartridge
String wound cartridge
Carbon block cartridge
GAC cartridges
Pleated cartridges
In-line cartridges
Under sink R.O.
Water purifier
Shower filter
Housing  
Ball valves
Quick connectors
Faucets
Other components
Filter bags

 

PP MELT BLOWN CARTRIDGE

Our PP melt blown cartridge is a real depth filters made by 100% pure Polypropylene resin, which meet the requirement of the FDA Title 21, the fiber are self-bonded and formed a 3D pore structure and density of micro-fiber can be varying more and more loose from inner to outer of the filter, in order to filtrate different diameter of dust in different layer. We have three kinds of PP filer including Pure-Clean type, Best-Clean type and P-clean to meet different customer's purpose.

The Pure-Clean type depth filter cartridge is designed and developed for RO system and any other water filter system for residential customer, which is made by thin micro-fiber from 1 Dan to 5 Dan from inside layer and outside layer, in order to supply stable efficiency rate to remove particle in the tap water.

The Best-Clean depth filter cartridge is two-layers structure cartridge with fine fibers in inner layer and coarse fiber in outer layer, this design has high contaminant holding capacity. Therefore, the filter will have a longer service life and lower pressure drop. 

The S-clean type depth filter cartridge is designed and developed to replace the Peach filter, Pall Coreless filter, Pentair RFC and other special products, as which have special size in ID of 80mm, 95mm, 115mm, substantially reduce operating costs.

  • Formed y thermal bond without use of any binders and adhesives.
  • Mutli-layers structure cartridge, high contaminat holding capacity.
  • Micro-fiber melt-blown cartridge, high removal ratings.
  • Four kinds of surface for to meet different request. 
  • Certificated by FDA CFR Title 21.

SPPC-MG-5-10B-2.5

SPBC-N-1-20-2.5

SPPC-S-5-10B-4.5

OEM are welcome

Operation conditions

Recommended replaceable pressure drop: 2.0Kg/cm2

Materials

100% polypropylene

Micron Rate:
(μm)

Nominal 1, 5, 10, 20, 30, 50, 75, 100 micron

Product specification

Inner diameter:11115mm
Outer diameter:28mm
185mm
Length:125mm
1270mm

Plenty Structures:

S TYPE N TYPE MG TYPE G TYPE

HOT STAMPING CORE TYPE MG WITH END CAP SHELL TYPE

for more information,please click here

 

COPYRIGHT (C) 2005-2015 SINO-FILTER CO.,LTD, ALL RIGHT RESERVED